Tuesday, August 11, 2009

Let's practise

Please refer to page 96:
Look at the pictures.Write a sentence for each picture on how to mend a bicycle puncture. Use the words given.
Posted by at

32 comments:

  1. naimAugust 11, 2009 at 9:51 PM

    1.Firstly remove the tube from the tyre
    2.Secondly,pump air into the tube
    3.And then put the tube into the tub to find the hole
    4.Forth,fix the rubber patch.And then cover the hole.
    5.Fifth fix the tube and then put them in the tyre.
    6.Lastly,pump the tyre with air.

    ReplyDelete
  2. surayaAugust 11, 2009 at 9:58 PM

    Firstly,remove the tube from the tyre.
    Secondly,pump air into the tube.
    Thirdly,tub the holes tube.
    And the,fix the rubber patch to cover the hole.
    After that,fix the tube into the tyre.
    Finally,pump the air.

    ReplyDelete
  3. MUHAMMAD ZUHAILI BIN AHMAD ROSHIDIAugust 11, 2009 at 9:59 PM

    1.Firstly, remove the tube out of the tyre.
    2.Secondly pump air into the tube.
    3.Third,then put the tube into the tub to find the holes.
    4.Forth.then fix the rubber patch and cover the holes with tapes
    5.And then fix the tube and then put it into the tyre .
    6.And lastly pump the tyre with air.

    ReplyDelete
  4. AnonymousAugust 11, 2009 at 10:00 PM

    1. Firstly,remove the tube from the tyre .
    2. sacond,pump air to the tube .
    3. Third,take the tub to see the holes.
    4. fourth,fix the rubber patch to cover the holes.
    5.fifth,fix the tube to the tyre.
    6. lastly, pump the air into the tyre.

    ReplyDelete
  5. Ikhmal HakimAugust 11, 2009 at 10:01 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,you must pump air at the tube.
    3.Next,you must clean the tub holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.And then,you must take the tube into the tyre.
    6.Lastly,your must pump air into the tyre

    ReplyDelete
  6. Elin AnuarAugust 11, 2009 at 10:03 PM

    1. Firstly, remove the tube from the tyre.

    2. Second, pump air in the tube.

    3. Put the tube in the tub and see if there are holes.

    4. After that, fix the rubber patch and cover the hole.

    5. Then, fix the tube at the tyre.

    6. Lastly, pump some air in the tube.

    ReplyDelete
  7. naimfitriAugust 11, 2009 at 10:04 PM

    Firstly,remove the tube from the tyre.Secondly,you must pump air at tube.Next,you must clean the tub holes.And then,you must cover the hole with rubber patch.And then,take the tube into the tyre.lastly,pump tube to get the air.

    ReplyDelete
  8. anis la...who else...August 11, 2009 at 10:04 PM

    1.Firstly,remove the tube from the tyre.
    2.Second,pump air into the tube.
    3.Third,washes the tube using the tub.
    4.Fourth,fix the rubber patch to cover the hole.
    5.Fifth,fix the tube at the tyre.
    6.Lastly,pump the tube with air.

    ReplyDelete
  9. afif5garcinia@gmail.comAugust 11, 2009 at 10:04 PM

    Let do bicycle.Firstly,remove the tube from the tyre.And then pumpair at tube.Put them in a water to know where the holes.And fix the rubber patch to cover the hole.Fix the tube in the tyre.Last one,pump air at tube.

    ReplyDelete
  10. Farah Izzaaty AfifiAugust 11, 2009 at 10:06 PM

    1.Firstly,remove the tube from the tyre.
    2.Second,pump air in the tube.
    3.Third,the tube put in the tub.
    4.Fourth,fix the rubber patch and then cover the holes.
    5.fifth,fix the tube at he tyre.
    6.Lastly,Pump some air in the tube.

    ReplyDelete
  11. Fatin NabihahAugust 11, 2009 at 10:06 PM

    1. Firstly,remove the tube from the tyre.
    2. After that,ase a pump air into the tube.
    3. After pump air,clean the tubes and find the hole.
    4. Forth,fix the tube with rubber patch and cover the hole.
    5. Fifth, fix the tube and then put it to the tyre.
    6. Lastly,pump the tyre with pump air.

    ReplyDelete
  12. tengku ahmad shafiqAugust 11, 2009 at 10:06 PM

    1.Firstly,remove the tube from the tyre.
    2.Second,you must pump air at the tube.
    3.Next,you must clean the tub holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.Fifth,you must take the tube into the tyre.
    6.Lastly,your must pump air into the tyre

    ReplyDelete
  13. AnonymousAugust 11, 2009 at 10:06 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,you must pump air at the tube.
    3.Next,you must clean the tub holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.And then,you must take the tube into the tyre.
    6.Lastly,your must pump air into the tyre

    ReplyDelete
  14. NajahAugust 11, 2009 at 10:07 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,pump air in the tube.
    3.Third,the tube put in the tub.
    4.Fourth,fix the rubber patch and then cover the holes.
    5.Firth,fix the tube and then put them in the tyre.
    6.Lastly,pump the tyre with air.

    ReplyDelete
  15. khairul5gar@gmail.comAugust 11, 2009 at 10:07 PM

    1.Firstly,remove the tube from the tyre.
    2.Second,pump air to the tube.
    3.Third,take the tube to the tub to find a holes.
    4.Fourth,fix the tube by rubber patch to cover a holes.
    5.Fifth,Fix the tube to the tyre.
    6.Then,pump a air to the tyre.

    ReplyDelete
  16. afiqrahman98@gmail.comAugust 11, 2009 at 10:08 PM

    Firstly, remove the tube from the tyre to pump it.
    Secondly, use a pump air to pump the tube.
    Thirdly, put the tube into the tub to see the holes.
    Fourtly, fix the tube, we must put a rubber patch and cover the hole.
    Fively, fix the tube into the tyre.
    Lastly, pump it to give air to the tube.

    ReplyDelete
  17. aimanwahid98@gmail.comAugust 11, 2009 at 10:08 PM

    1. Firstly, remove the tube from the to pump it.
    2 Secondly,use a pump air to pump the tube.
    3. Next,put the tube into the tub to see the holes.
    4. Too fix the tube, we must put arubber patch and cover the hole.
    5. Fix the tube into the tyre.
    6.Lastly,pump it to give the air to the tube.

    ReplyDelete
  18. AnonymousAugust 11, 2009 at 10:09 PM

    1. Firstly,remove the tube from the tyre.
    2. Secondly,pump the tube with the pump air.
    3. Thirdly, put the tube into the tub to find
    the holes.
    4. Fofth,fix the rubber patch and then cover
    the hole.
    5. Fifth,fix the tube at the tyre.
    6. Lastly,pump the tube with pump air.

    ReplyDelete
  19. syafiqahAugust 11, 2009 at 10:10 PM

    1.Firstly, remove the tube from the tyre.
    2.Secondly, pump air into the tube.
    3.Thirdly, wash the tube sunddely,the tub at holes.
    4.Forthly,fix the rubber patch and cover the hole.
    5.Fifthly,fix the tube and then the tyre not hole.
    Lastly,pump the tyre with air.

    ReplyDelete
  20. Alif HaikalAugust 11, 2009 at 10:11 PM

    1.Firstly, removethe tube from the tyre.
    2.secondly, pump air into the tube.
    3.and the tube into the tub find the hole
    4.forth,fix the tyre. and the cover the hole.
    5.fifth fix the tube and put them in the tyre.
    6.the Last, the pump the tyre with air.

    ReplyDelete
  21. hidayahAugust 11, 2009 at 10:12 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,pump air into the tube.
    3.Thirdly,put the tube into the tub to find the holes.
    4.Forth,fix the rubber patch and then cover the hole.
    5.Firth,fix the tube at he tyre.
    6.Finally,pump the tyre with air.

    ReplyDelete
  22. Adi HidayatAugust 11, 2009 at 10:12 PM

    1.Firstly remove the tube from the tyre.
    2.Secondly,pump air into the tube.
    3.Now,put the tube in the water to check the hole.
    4.Forth,fix the rubber patch and then cover the hole.
    5.Fifth,fix the tube and put them in the hole
    6.And the last,pump the tyre with air.






    6.

    ReplyDelete
  23. SamAugust 11, 2009 at 10:13 PM

    1.Firstly,remove the tube from the tyre.
    2.Second,pump air in the tube.
    3.Third,the tube put in the tub.
    4.Fourth,fix the rubber patch and then cover the holes.
    5.fifth,fix the tube at he tyre.
    6.Lastly,Pump some air in the tube.

    ReplyDelete
  24. aniq tauhidAugust 11, 2009 at 10:16 PM

    Firstly ,remove the tube from the tyre.
    Secondly, pump air into the tube.
    Thirdly ,put the tube to find a hole.
    Next fix ,the rubber patch,and then cover the hole at ,the tube.
    And then, fix the tube into the tyre.
    Finally ,pump the tyre with the air

    ReplyDelete
  25. hafiz hishamAugust 11, 2009 at 10:19 PM

    1.FIrstly, remove the tube from the tire.
    2.Secondly,pump air into the tube.
    3.Third,then put the tube into the tab to find the holes.
    4.Fourth,fix the rubber patch to cover the holes.
    5.Fifth,fix the tube to the tire.
    6.And the lastly,pump the air into the tire.

    ReplyDelete
  26. siti zulaikha zabirAugust 11, 2009 at 10:19 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,pump air the tube.
    3.Thirdly,wash the tube and the holes.
    4.Forthly,fix the rubber patch and cover the hole.
    5.Fifthly,fix the tube at the tyre.
    6.Lastly,pump the tyre with pump air.

    ReplyDelete
  27. UnknownAugust 12, 2009 at 3:45 AM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,pump air into the tube.
    3.Thirdly,put the tube into the tab to find the holes.
    4.Forthly,fix the rubber patch to cover the holes.
    5.Fifthly,fix the tube at the tyre.
    6.Lastly,pump the tyre with the air.

    ReplyDelete
  28. Ikhmal HakimAugust 12, 2009 at 5:49 AM

    CORRECTION

    1.Firstly,remove the tube from the tyre.
    2.Secondly,you must pump air at the tube.
    3.Next,put the tube into the tab so we can find the holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.And then,you must take the tube into the tyre.
    6.Lastly,your must pump air into the tyre

    ReplyDelete
  29. aisyahsyifalokman.lokman@gmail.comAugust 16, 2009 at 7:29 AM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,pump air into the tube.
    3.Then tub the tubes to find the holes.
    4.Fourth,fin the holes with rubber patch to holes.
    5.After that,fin the tube and the tyre as it was and place it back at the right place.
    6.Lastly,do not forget to pump the air into the tyre again.

    ReplyDelete
  30. nur munirah munawarAugust 22, 2009 at 12:46 AM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,you must pump air into the tube.
    3.Next,you must clean the tube holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.And then,you must take the tube into the tyre.
    6.Lastly,your must pump air into the tyre again.

    ReplyDelete
  31. AnonymousSeptember 1, 2009 at 9:41 PM

    1.Firstly remove the tube from the tyre
    2.Secondly,you must pump air into the tube.
    3.Then tub the tubes to find the holes.
    4.And then,you must cover the hole with the
    rubber patch.
    5.And then,you must take the tube into the tyre.
    6.Lastly,do not forget to pump the air into the tyre again.

    ReplyDelete
  32. Zakiah IsmailSeptember 1, 2009 at 9:56 PM

    1.Firstly,remove the tube from the tyre.
    2.Secondly,we pump air in the tube.
    3.Thirdly,the tub a tube to look the holes.
    4.Fourtly,we fix the rubber patch and coover the hole.
    5.Then,fix the tube of the tyre.
    6.Lastly,we pump the air into the tyre.

    ReplyDelete

Subscribe to: Post Comments (Atom)